Unsteadiness of an axisymmetric separating-reattaching flow: Numerical investigation
From MaRDI portal
Publication:5190655
DOI10.1063/1.2734996zbMath1182.76190OpenAlexW1966866273MaRDI QIDQ5190655
Pascal Thorigny, Sébastien Deck
Publication date: 18 March 2010
Published in: Physics of Fluids (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1063/1.2734996
convectionvorticesboundary layersflow separationbubblesflow simulationsubsonic flowflow instabilityexternal flows
Related Items
Numerical investigation of a jet from a blunt body opposing a supersonic flow, On the coupling of a zonal body-fitted/immersed boundary method with ZDES: application to the interactions on a realistic space launcher afterbody flow, Numerical investigation of turbulent supersonic axisymmetric wakes, On the dynamics of axisymmetric turbulent separating/reattaching flows, Zonal detached eddy simulation of a spatially developing flat plate turbulent boundary layer, Analysis of characteristic wake flow modes on a generic transonic backward-facing step configuration, On the estimation of unsteady aerodynamic forces and wall spectral content with immersed boundary conditions, Delayed detached eddy simulation of the end-effect regime and side-loads in an overexpanded nozzle flow, A dynamic forcing method for unsteady turbulent inflow conditions, Reduced-order analysis of buffet flow of space launchers, From pressure fluctuations to dynamic loads on axisymmetric step flows with minimal number of kulites, Compressibility effects on the vortical flow over a 65° sweep delta wing, Large eddy simulation for aerodynamics: status and perspectives, Numerical workflow for scale-resolving computations of space launcher afterbody flows with and without jets, Direct simulation of turbulent swept flow over a wire in a channel, Analysis of detached-eddy simulation for the flow around a circular cylinder with reference to PIV data, Numerical simulation of the compressible mixing layer past an axisymmetric trailing edge, Mechanisms in the hypersonic laminar near wake of a blunt body, Large-eddy simulation of the compressible flow past a wavy cylinder, Numerical investigation of the flow dynamics past a three-element aerofoil
Cites Work
- Control of vortex shedding in an axisymmetric bluff body wake
- A new version of detached-eddy simulation, resistant to ambiguous grid densities
- On coherent-vortex identification in turbulence
- Numerical simulation of active separation control by a synthetic jet
- An approach to wall modeling in large-eddy simulations
- Numerical investigations of flow over a sphere in the subcritical and supercritical regimes
- Self-sustained oscillations and vortex shedding in backward-facing step flows: Simulation and linear instability analysis
- Vortex shedding in high Reynolds number axisymmetric bluff-body wakes: Local linear instability and global bleed control
- Large-eddy simulation of a compressible flow past a deep cavity
- Wall-pressure-array measurements beneath a separating/reattaching flow region
- Topological constraints associated with fast dynamo action
- A note on vortex shedding from axisymmetric bluff bodies
- A numerical investigation of the coherent vortices in turbulence behind a backward-facing step
- Direct numerical simulation of turbulent flow over a backward-facing step
- The mixing layer over a deep cavity at high-subsonic speed
- Direct numerical simulation of ‘short’ laminar separation bubbles with turbulent reattachment
- Compressibility effects in a turbulent annular mixing layer. Part 1. Turbulence and growth rate
- Large-eddy simulation of a compressible flow in a three-dimensional open cavity at high Reynolds number
- Multiple-arrayed pressure measurement for investigation of the unsteady flow structure of a reattaching shear layer
- Development and application of Spalart–Allmaras one equation turbulence model to three-dimensional supersonic complex configurations
- Large-Eddy Simulations of Turbulence
- Investigation of the flow behind a two-dimensional model with a blunt trailing edge and fitted with splitter plates
