Crossflow instability in a hypersonic boundary layer
From MaRDI portal
Publication:5360541
DOI10.1017/jfm.2016.643zbMath1383.76316OpenAlexW2544807293MaRDI QIDQ5360541
Stuart A. Craig, William S. Saric
Publication date: 28 September 2017
Published in: Journal of Fluid Mechanics (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1017/jfm.2016.643
Related Items
Instabilities in three-dimensional boundary-layer flows with a highly non-ideal fluid ⋮ Boundary layer transition and linear modal instabilities of hypersonic flow over a lifting body ⋮ Control of stationary cross-flow modes in a Mach 6 boundary layer using patterned roughness ⋮ Cross-flow vortices and their secondary instabilities in hypersonic and high-enthalpy boundary layers ⋮ Effect of cone rotation on the nonlinear evolution of Mack modes in supersonic boundary layers ⋮ Transition mechanisms in cross-flow-dominated hypersonic flows with free-stream acoustic noise ⋮ Secondary instability analysis of crossflow on a hypersonic yawed straight circular cone ⋮ The secondary instabilities of stationary cross-flow vortices in a Mach 6 swept wing flow ⋮ Linear instability of a supersonic boundary layer over a rotating cone
Cites Work
- Unnamed Item
- Unnamed Item
- Normalizing bispectra
- Observations of hypervelocity boundary-layer instability
- Remarks on disputed numerical results in compressible boundary-layer stability theory
- Secondary instability of crossflow vortices: validation of the stability theory by direct numerical simulation
- S<scp>TABILITY AND</scp> T<scp>RANSITION OF</scp> T<scp>HREE</scp>-D<scp>IMENSIONAL</scp> B<scp>OUNDARY</scp> L<scp>AYERS</scp>
- Mechanisms and passive control of crossflow-vortex-induced transition in a three-dimensional boundary layer
- Secondary instability of crossflow vortices
- Secondary instability of crossflow vortices and swept-wing boundary-layer transition
- Secondary instability analysis of crossflow on a hypersonic yawed straight circular cone
- Control of stationary cross-flow modes in a Mach 3.5 boundary layer using patterned passive and active roughness