Three-dimensional coating and rimming flow: a ring of fluid on a rotating horizontal cylinder
From MaRDI portal
Publication:5406492
DOI10.1017/JFM.2012.509zbMath1284.76050OpenAlexW2152467431MaRDI QIDQ5406492
G. A. Leslie, Stephen K. Wilson, Brian R. Duffy
Publication date: 1 April 2014
Published in: Journal of Fluid Mechanics (Search for Journal in Brave)
Full work available at URL: https://strathprints.strath.ac.uk/42349/
Related Items (5)
Pinning, de-pinning and re-pinning of a slowly varying rivulet ⋮ Fingering instability on curved substrates: optimal initial film and substrate perturbations ⋮ Stability analysis of non-Newtonian rimming flow ⋮ Coating flow on a rotating cylinder in the presence of an irrotational airflow with circulation ⋮ Rivulet flow over a flexible beam
Cites Work
- Formation of the free surface of a viscous fluid volume inside a rotating horizontal cylinder
- Navier-Stokes solutions for steady parallel-sided pendent rivulets
- On rimming flows with shocks
- Existence and stability of regularized shock solutions, with applications to rimming flows
- On the approach to the critical solution in leading order thin-film coating and rimming flow
- Rimming flows within a rotating horizontal cylinder: asymptotic analysis of the thin-film lubrication equations and stability of their solutions
- On the stability of viscous free–surface flow supported by a rotating cylinder
- The energetics of the breakup of a sheet and of a rivulet on a vertical substrate in the presence of a uniform surface shear stress
- On the depinning of a drop of partially wetting liquid on a rotating cylinder
- On the Critical Solutions in Coating and Rimming Flow on a Uniformly Rotating Horizontal Cylinder
- A Slender Rivulet of a Power-Law Fluid Driven by Either Gravity or a Constant Shear Stress at the Free Surface
- Similarity Solutions for Unsteady Gravity-Driven Slender Rivulets
- Numerical solution of the free-surface viscous flow on a horizontal rotating elliptical cylinder
- Does Surface Tension Stabilize Liquid Films Inside a Rotating Horizontal Cylinder? Part 2: Multidimensional Disturbances
- Axial instability of a free-surface front in a partially filled horizontal rotating cylinder
- On inertial effects in the Moffatt–Pukhnachov coating-flow problem
- Steady and unsteady solutions for coating flow on a rotating horizontal cylinder: Two-dimensional theoretical and numerical modeling
- Inertial instability of a liquid film inside a rotating horizontal cylinder
- Three-dimensional solutions for coating flow on a rotating horizontal cylinder: Theory and experiment
- Unidirectional flow of a thin rivulet on a vertical substrate subject to a prescribed uniform shear stress at its free surface
- The run-off condition for coating and rimming flows
- Steady-state coating flows inside a rotating horizontal cylinder
- The effect of surface tension on rimming flows in a partially filled rotating cylinder
- NavierStokes solutions for parallel flow in rivulets on an inclined plane
- On the decay and drift of free-surface perturbations in viscous thin-film flow exterior to a rotating cylinder
- Longitudinal flow of a lenticular liquid filament down an inclined plane
- Meandering instability of a rivulet
- On the breakup of a thin liquid film subject to interfacial shear
- Thin-film and curtain flows on the outside of a rotating horizontal cylinder
- On the stability of liquid ridges
- Thermoviscous Coating and Rimming Flow
- Low volume fraction rimming flow in a rotating horizontal cylinder
- On the breakup of fluid rivulets
- On the stability of shallow rivulets
- On the development of rational approximations incorporating inertial effects in coating and rimming flows: a multiple-scales approach
- Analytical and numerical studies of the stability of thin-film rimming flow subject to surface shear
This page was built for publication: Three-dimensional coating and rimming flow: a ring of fluid on a rotating horizontal cylinder
