The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints

DOI10.1016/j.ijsolstr.2008.11.016zbMath1215.74078OpenAlexW2049778107MaRDI QIDQ545101

Peter A. Gustafson, Anthony M. Waas

Publication date: 22 June 2011

Published in: International Journal of Solids and Structures (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.ijsolstr.2008.11.016

zbMATH Keywords

sensitivityfracturestrengthLatin hypercube samplingcompositecomputer experimentstoughnessdouble cantilever beamadhesive bondend notch flexureKriging analysisparameter interactionsingle lap joint

Mathematics Subject Classification ID

Finite element methods applied to problems in solid mechanics (74S05) Junctions (74K30)

Related Items

Atomic force microscopy indentation and inverse analysis for non-linear viscoelastic identification of breast cancer cells, Finite element guidelines for simulation of delamination dominated failures in composite materials validated by case studies, Characterization of a cohesive-zone model describing damage and de-cohesion at bonded interfaces. Sensitivity analysis and mode-I parameter identification

Uses Software

• ABAQUS
• DACE

Cites Work

• Unnamed Item
• Constitutive behaviour of mixed mode loaded adhesive layer
• The relation between crack growth resistance and fracture process parameters in elastic-plastic solids
• Numerical simulations of fast crack growth in brittle solids
• Computational modelling of impact damage in brittle materials
• A cohesive segments method for the simulation of crack growth
• Some issues in the application of cohesive zone models for metal-ceramic interfaces
• The effects of geometry and material properties on the fracture of single lap-shear joints
• Shear behaviour of adhesive layers
• On the numerical simulation of fatigue driven delamination with interface elements
• Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues
• A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer Code
• Finite element analysis of deformation of strain-softening materials
• Dynamic crack propagation with cohesive elements: a methodology to address mesh dependency
• On the numerical integration of interface elements
• Comparison between two approaches for the simulation of delamination growth in a D.C.B. specimen