scientific article; zbMATH DE number 3077570
From MaRDI portal
Publication:5816479
zbMath0049.25606MaRDI QIDQ5816479
Publication date: 1952
Title: zbMATH Open Web Interface contents unavailable due to conflicting licenses.
Related Items
Modelling the plastic anisotropy of metals ⋮ Effects of superimposed hydrostatic pressure on fracture in round bars under tension ⋮ Constitutive modeling and finite element methods for TRIP steels ⋮ Random distributions of initial porosity trigger regular necking patterns at high strain rates ⋮ Strain hardening exponent role in phenomenological ductile fracture criteria ⋮ Unified simulation of hardening and softening effects for metals up to failure ⋮ Finite deformation of a hollow sphere of linear elastic perfectly plastic material ⋮ Two formulations of elastoplastic problems and the theoretical determination of the location of neck formation in samples under tension ⋮ Application of extended Mohr-Coulomb criterion to ductile fracture ⋮ Fracture characteristics of a cold-rolled dual-phase steel ⋮ An investigation into the effect of strain rate on forming limit diagram using ductile fracture criteria ⋮ Use of the quasi-static Johnson-Cook model in the failure assessment of tensile specimens with metallurgical constraints ⋮ Experimental study and modeling of damage of Al alloys using tensor theory ⋮ Coupling of Elastic and Failure Properties of Initially Anisotropic Solids by Means of the Elliptic Paraboloid Failure Surface (EPFS) Criterion ⋮ Effect of the third invariant on the formation of necking instabilities in ductile plates subjected to plane strain tension ⋮ On the influence of stress triaxiality and strain rate on the behaviour of a structural steel. I: Experiments ⋮ On the influence of stress triaxiality and strain rate on the behaviour of a structural steel. II: Numerical study ⋮ Über das Statistische Modell des Metallischen Wolframs ⋮ A new model of metal plasticity and fracture with pressure and Lode dependence ⋮ Numerical simulation of fracture mode transition in ductile plates ⋮ A local viewpoint for evaluating the influence of stress triaxiality and Lode angle on ductile failure and hardening ⋮ Plastische Inkompressibilität bei großen Formänderungen ⋮ Analysis of endurance of the material in the nozzle throat in high-pressure gas-dynamic facilities ⋮ Flow through porous media due to high pressure gradients ⋮ Modeling void nucleation and growth within periodic clusters of particles ⋮ Influence of hydrostatic stress on failure of axisymmetric notched specimens ⋮ Generalizations of the Navier-Stokes fluid from a new perspective ⋮ Murnaghan's elastoplastic material model ⋮ Asymptotic analysis of stability for prismatic solids under axial loads ⋮ Thickness dependence of cracking resistance in thin aluminium plates ⋮ Unnamed Item ⋮ The symmetric ellipsoid failure surface for the transversely isotropic body ⋮ A thermodynamically consistent peridynamics model for visco-plasticity and damage ⋮ A note on the flow through porous solids at high pressures ⋮ Failure criteria for weak-axis quasi-orthotropic woven fabric composites ⋮ A viscoplastic theory with thermodynamic considerations ⋮ The elliptic paraboloid failure criterion for cellular solids and brittle foams ⋮ A unified approach for plasticity yield criteria on the tangent space to the Cauchy tensor ⋮ Influence of non-classical elastic-plastic constitutive features on shock wave existence and spectral solutions ⋮ On the dynamics of non-linear viscoelastic solids with material moduli that depend upon pressure ⋮ Flow of a fluid with pressure dependent viscosity due to a boundary that is being stretched ⋮ On a mathematical model of journal bearing lubrication ⋮ Stability of elastic bodies under omnilateral compression ⋮ Effects of superimposed hydrostatic pressure on sheet metal formability ⋮ A computational model of viscoplasticity and ductile damage for impact and penetration ⋮ Dynamic strain aging and related instabilities: experimental, theoretical and numerical aspects ⋮ Heat sources, energy storage and dissipation in high-strength steels: experiments and modelling ⋮ A combined phenomenological model for the representation of anisotropic hardening behavior in high strength steel line pipes ⋮ Tensile deformation of a round bar ⋮ Wave propagation in initially-stressed elastic solids ⋮ Discretization and material parameter characterization for a HAZ in direct-quenched armor steel ⋮ On a New Concept and Foundations of an Arbitrary Reference Configuration (ARC) Theory and Formulation for Computational Finite Deformation Applications—Part II: Elasto-Plasticity ⋮ Void coalescence within periodic clusters of particles. ⋮ On the possibility of a simple observationally correct criterion for fracture in solids ⋮ On the symmetry and coaxiality of pertinent stretch and stress tensors during non-proportional loading at finite plastic strain ⋮ A phase-field formulation for fracture in ductile materials: finite deformation balance law derivation, plastic degradation, and stress triaxiality effects ⋮ Generalised forming limit diagrams showing increased forming limits with non-planar stress states ⋮ A numerical study of necking in circular cylindrical bars ⋮ DUCTILE FAILURE SIMULATION IN SPHERODIZED STEEL USING A CONTINUUM DAMAGE MECHANICS COUPLED FINITE ELEMENT FORMULATION ⋮ Mechanics of solids ⋮ Transition of failure modes in round-nosed mass-to-beam impact ⋮ Phase transitions in elastoplastic materials: Continuum thermomechanical theory and examples of control. I ⋮ Model-based estimation of the stress-strain curve of metal strips
This page was built for publication:
