Calibration of elastoplastic constitutive model parameters from full‐field data with automatic differentiation‐based sensitivities
From MaRDI portal
Publication:6061714
DOI10.1002/nme.6843zbMath1530.74013arXiv2010.03649MaRDI QIDQ6061714
Brian N. Granzow, D. Thomas Seidl
Publication date: 31 October 2023
Published in: International Journal for Numerical Methods in Engineering (Search for Journal in Brave)
Full work available at URL: https://arxiv.org/abs/2010.03649
finite element methodadjoint methodgradient-based optimization algorithmpartial differential equation-constrained optimizationfinite deformation elastoplasticitydigital image correlation data
Finite element methods applied to problems in solid mechanics (74S05) Large-strain, rate-independent theories of plasticity (including nonlinear plasticity) (74C15) Optimization of other properties in solid mechanics (74P10)
Related Items (1)
Cites Work
- Unnamed Item
- Identification of plastic constitutive parameters at large deformations from three dimensional displacement fields
- Anisotropic finite elastoplasticity with nonlinear kinematic and isotropic hardening and application to sheet metal forming
- Adjoint lattice Boltzmann for topology optimization on multi-GPU architecture
- Deformation process design for control of microstructure in the presence of dynamic recrystallization and grain growth mechanisms
- Automation of primal and sensitivity analysis of transient coupled problems
- A multi-length scale sensitivity analysis for the control of texture-dependent properties in deformation processing
- A Newton-Schur alternative to the consistent tangent approach in computational plasticity
- Higher order stabilized finite element method for hyperelastic finite deformation
- Parameter identification for finite deformation elasto-plasticity in principal directions
- A continuum sensitivity method for the design of multi-stage metal forming processes.
- Theoretical, numerical and identification aspects of a new model class for ductile damage
- Big data in experimental mechanics and model order reduction: today's challenges and tomorrow's opportunities
- Fast Bayesian optimal experimental design for seismic source inversion
- Towards efficient backward-in-time adjoint computations using data compression techniques
- Shape optimization and preform design in metal forming processes
- Computational design of deformation processes for materials with ductile damage
- A stabilized mixed finite element method for finite elasticity. Formulation for linear displacement and pressure interpolation
- Aspects on the finite-element implementation of the Gurson model including parameter identification
- Adjoint-based error estimation and mesh adaptation for stabilized finite deformation elasticity
- Simulation of finite-strain inelastic phenomena governed by creep and plasticity
- A phase-field formulation for fracture in ductile materials: finite deformation balance law derivation, plastic degradation, and stress triaxiality effects
- Efficient adjoint sensitivity analysis of isotropic hardening elastoplasticity via load steps reduction approximation
- Topology optimization of turbulent flows
- The continuum sensitivity method for the computational design of three-dimensional deformation processes
- Design of microstructure-sensitive properties in elasto-viscoplastic polycrystals using multi-scale homogenization
- A sensitivity analysis for the optimal design of metal-forming processes
- Stabilized finite element formulation for elastic--plastic finite deformations
- Design across length scales: a reduced-order model of polycrystal plasticity for the control of microstructure-sensitive material properties
- Topology optimization for effective energy propagation in rate-independent elastoplastic material systems
- An updated Lagrangian finite element sensitivity analysis of large deformations using quadrilateral elements
- Efficient Expression Templates for Operator Overloading-Based Automatic Differentiation
- Closed-form matrix exponential and its application in finite-strain plasticity
- Comparison of the identification performance of conventional FEM updating and integrated DIC
- A 10-node composite tetrahedral finite element for solid mechanics
- Automation of Finite Element Methods
- Evaluating Derivatives
- The method of moving asymptotes—a new method for structural optimization
- Algorithm 778: L-BFGS-B
- Tangent operators and design sensitivity formulations for transient non‐linear coupled problems with applications to elastoplasticity
- A continuum Lagrangian sensitivity analysis for metal forming processes with applications to die design problems
- A continuum sensitivity method for finite thermo-inelastic deformations with applications to the design of hot forming processes
- A theory of the yielding and plastic flow of anisotropic metals
This page was built for publication: Calibration of elastoplastic constitutive model parameters from full‐field data with automatic differentiation‐based sensitivities
