A mechanical model for thin sheet straight cutting in the presence of an elastic support

DOI10.1016/j.ijengsci.2023.103964OpenAlexW4387866317MaRDI QIDQ6063681

Gennady S. Mishuris, Andrea Nobili, T. S. Shugailo

Publication date: 12 December 2023

Published in: International Journal of Engineering Science (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.ijengsci.2023.103964

zbMATH Keywords

stress intensity factorsfoundationlinear fracture mechanicsthin sheet cutting

Mathematics Subject Classification ID

Mechanics of deformable solids (74-XX) Biology and other natural sciences (92-XX)

Cites Work

• Unnamed Item
• Unnamed Item
• On the effect of the backup plate stiffness on the brittle failure of a ceramic armor
• Green's functions for an anisotropic thin plate with a crack or an anticrack
• Forced waves in a uniform waveguide with distributed and localized dynamic structures attached
• Symmetric and skew-symmetric weight functions in 2D perturbation models for semi-infinite interfacial cracks
• Dynamic phenomena and crack propagation in dissimilar elastic lattices
• Crack approaching a domain having the same elastic properties but different fracture toughness: crack deflection \textit{vs} penetration
• Energy release rate, the crack closure integral and admissible singular fields in fracture mechanics
• Time-dependent buckling delamination of thin plastic films and their conformability: observations and modeling
• Microstructured induced band pattern in love wave propagation for novel nondestructive testing (NDT) procedures
• On stress singularity near the tip of a crack with surface stresses
• An approximate three-dimensional theory of plates with application to crack problems
• Constructive methods for factorization of matrix-functions
• The Bending Stress Distribution at the Base of a Stationary Crack
• Flexural edge waves generated by steady-state propagation of a loaded rectilinear crack in an elastically supported thin plate
• Green's functions for unsymmetric composite laminates with inclusions
• The Bending Stress in a Cracked Plate on an Elastic Foundation

This page was built for publication: A mechanical model for thin sheet straight cutting in the presence of an elastic support