Ghost stabilisation of the material point method for stable quasi‐static and dynamic analysis of large deformation problems
From MaRDI portal
Publication:6082630
DOI10.1002/nme.7332zbMath1528.74115arXiv2209.10955OpenAlexW4384829420MaRDI QIDQ6082630
Publication date: 30 November 2023
Published in: International Journal for Numerical Methods in Engineering (Search for Journal in Brave)
Full work available at URL: https://arxiv.org/abs/2209.10955
explicit dynamicsfinite deformation mechanicsimplicit analysiselastic cantilever beamself-weight column compression
Rods (beams, columns, shafts, arches, rings, etc.) (74K10) Nonlinear elasticity (74B20) Numerical and other methods in solid mechanics (74S99)
Cites Work
- Unnamed Item
- Unnamed Item
- Fictitious domain finite element methods using cut elements. II: A stabilized Nitsche method
- Ghost penalty
- Energy conservation error in the material point method for solid mechanics
- The finite cell method for three-dimensional problems of solid mechanics
- Finite cell method. \(h\)- and \(p\)-extension for embedded domain problems in solid mechanics
- FLIP: A method for adaptively zoned, particle-in-cell calculations of fluid flows in two dimensions
- Mass matrix formulation of the FLIP particle-in-cell method
- Algorithms for static and dynamic multiplicative plasticity that preserve the classical return mapping schemes of the infinitesimal theory
- Application of a particle-in-cell method to solid mechanics
- The material-point method for granular materials
- A particle method for history-dependent materials
- On the use of domain-based material point methods for problems involving large distortion
- On Lagrangian mechanics and the implicit material point method for large deformation elasto-plasticity
- Material point method simulations using an approximate full mass matrix inverse
- Linking ghost penalty and aggregated unfitted methods
- Unfitted finite element method for fully coupled poroelasticity with stabilization
- A total-Lagrangian material point method for solid mechanics problems involving large deformations
- High-order cut finite elements for the elastic wave equation
- A stabilised immersed boundary method on hierarchical b-spline grids for fluid-rigid body interaction with solid-solid contact
- A new method for material point method particle updates that reduces noise and enhances stability
- A frictional contact algorithm for implicit material point method
- Shape optimization using the cut finite element method
- Overcoming volumetric locking in material point methods
- Higher order cut finite elements for the wave equation
- Cut finite element methods for linear elasticity problems
- Distribution coefficient algorithm for small mass nodes in material point method
- XIGA: an eXtended IsoGeometric analysis approach for multi-material problems
- A convected particle domain interpolation technique to extend applicability of the material point method for problems involving massive deformations
- Second-order convected particle domain interpolation (CPDI2) with enrichment for weak discontinuities at material interfaces
- CutFEM: Discretizing geometry and partial differential equations
- Contact algorithms for the material point method in impact and penetration simulation
- An energy-consistent material-point method for dynamic finite deformation plasticity
- Analysis and reduction of quadrature errors in the material point method (MPM)
- Elastic crack growth in finite elements with minimal remeshing
- Finite cover method for linear and non-linear analyses of heterogeneous solids
- A finite element method for crack growth without remeshing
- A conservation law consistent updated Lagrangian material point method for dynamic analysis
