Artificial instabilities of finite elements for nonlinear elasticity: Analysis and remedies

Cites Work

Unnamed Item
Unnamed Item
Unnamed Item
Unnamed Item
Unnamed Item
A new mixed finite element based on different approximations of the minors of deformation tensors
Variational and projection methods for the volume constraint in finite deformation elasto-plasticity
An improved EAS brick element for finite deformation
On the ellipticity of the equations of nonlinear elastostatics for a special material
Bifurcation phenomena in the plane compression test
Bifurcation phenomena in the plane tension test
On the convergence of Wilson's nonconforming element for solving the elastic problems
A note on enhanced strain methods for large deformations
Design of simple low order finite elements for large strain analysis of nearly incompressible solids
A new 3-D finite element for nonlinear elasticity using the theory of a Cosserat point.
A deformation-dependent stabilization technique, exemplified by EAS elements at large strains
Numerical evaluation of discontinuous and nonconforming finite element methods in nonlinear solid mechanics
A computational framework for polyconvex large strain elasticity
On the stability analysis of hyperelastic boundary value problems using three- and two-field mixed finite element formulations
Enhanced lower-order element formulations for large strains
Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems
Remarks on ellipticity for the generalized Blatz-Ko constitutive model for a compressible nonlinearly elastic solid
Three-field mixed finite element methods for nonlinear elasticity
Post-bifurcation equilibria in the plane-strain test of a hyperelastic rectangular block
Approximation of incompressible large deformation elastic problems: some unresolved issues
A stability study of some mixed finite elements for large deformation elasticity problems
A 4-node finite shell element for the implementation of general hyperelastic 3D-elasticity at finite strains
On the formulation of enhanced strain finite elements in finite deformations
Nonlinear Solid Mechanics
A reduced integration solid-shell finite element based on the EAS and the ANS concept-Large deformation problems
Rational approach for assumed stress finite elements
A finite deformation brick element with inhomogeneous mode enhancement
A uniform strain hexahedron and quadrilateral with orthogonal hourglass control
Geometrically non-linear enhanced strain mixed methods and the method of incompatible modes
Spurious modes in two-dimensional isoparametric elements
A new stabilization technique for finite elements in non-linear elasticity
A geometrical non-linear brick element based on the EAS-method
On a consistent hourglass stabilization technique to treat large inelastic deformations and thermo-mechanical coupling in plane strain problems
Analysis of 3D problems using a new enhanced strain hexahedral element
A stabilization technique to avoid hourglassing in finite elasticity
Remarks on the stability of enhanced strain elements in finite elasticity and elastoplasticity
Stability and Convergence of a Class of Enhanced Strain Methods
A stabilised large-strain elasto-plastic Q1-P0 method
A class of mixed assumed strain methods and the method of incompatible modes
Reduced integration technique in general analysis of plates and shells
On the enhancement of low-order mixed finite element methods for the large deformation analysis of diffusion in solids

This page was built for publication: Artificial instabilities of finite elements for nonlinear elasticity: Analysis and remedies