A subdivision-stabilized B-Spline mixed material point method
From MaRDI portal
Publication:6201153
DOI10.1016/j.cma.2023.116567OpenAlexW4388177051MaRDI QIDQ6201153
Ashkan Ali Madadi, Berkin Dortdivanlioglu
Publication date: 25 March 2024
Published in: Computer Methods in Applied Mechanics and Engineering (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.cma.2023.116567
B-splinesmaterial point methodstabilized mixed formulationpolymeric materialssubdivision methodisogeometric MPM
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Subdivision-stabilised immersed b-spline finite elements for moving boundary flows
- Material point method enhanced by modified gradient of shape function
- A technique to develop mesh-distortion immune finite elements
- Stabilized low-order finite elements for frictional contact with the extended finite element method
- Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
- A stable finite element for the Stokes equations
- A numerical solution of the Navier-Stokes equations using the finite element technique
- A note on enhanced strain methods for large deformations
- Application of a particle-in-cell method to solid mechanics
- The material-point method for granular materials
- Material point methods applied to one-dimensional shock waves and dual domain material point method with sub-points
- Incompressible material point method for free surface flow
- A finite element formulation in boundary representation for the analysis of nonlinear problems in solid mechanics
- On the use of domain-based material point methods for problems involving large distortion
- On Lagrangian mechanics and the implicit material point method for large deformation elasto-plasticity
- Modelling contacts with a total Lagrangian material point method
- IGA-MPM: the isogeometric material point method
- Modeling curvature-resisting material surfaces with isogeometric analysis
- An improved quadrature scheme in B-spline material point method for large-deformation problem analysis
- Treatment of near-incompressibility and volumetric locking in higher order material point methods
- A total-Lagrangian material point method for solid mechanics problems involving large deformations
- Mixed stress-displacement isogeometric collocation for nearly incompressible elasticity and elastoplasticity
- ILS-MPM: an implicit level-set-based material point method for frictional particulate contact mechanics of deformable particles
- Using poro-elasticity to model the large deformation of tissue during subcutaneous injection
- Implicit formulation of material point method for analysis of incompressible materials
- An isogeometric method for linear nearly-incompressible elasticity with local stress projection
- Stabilized material point methods for coupled large deformation and fluid flow in porous materials
- A stabilized mixed implicit material point method for non-linear incompressible solid mechanics
- Subdivision based mixed methods for isogeometric analysis of linear and nonlinear nearly incompressible materials
- A numerical strategy for investigating the kinetic response of stimulus-responsive hydrogels
- The finite element method with Lagrangian multipliers
- Stabilized mixed finite elements for deformable porous media with double porosity
- \(\overline {\text B}\) and \(\overline {\text F}\) projection methods for nearly incompressible linear and nonlinear elasticity and plasticity using higher-order NURBS elements
- Stabilized low-order finite elements for coupled solid-deformation/fluid-diffusion and their application to fault zone transients
- Distribution coefficient algorithm for small mass nodes in material point method
- Reduced quadrature for finite element and isogeometric methods in nonlinear solids
- A mixed polygonal finite element formulation for nearly-incompressible finite elasticity
- A convected particle domain interpolation technique to extend applicability of the material point method for problems involving massive deformations
- Second-order convected particle domain interpolation (CPDI2) with enrichment for weak discontinuities at material interfaces
- Solving quasi‐static equations with the material‐point method
- Controlling the onset of numerical fracture in parallelized implementations of the material point method (MPM) with convective particle domain interpolation (CPDI) domain scaling
- The inf-sup test
- Analysis and reduction of quadrature errors in the material point method (MPM)
- Package for Calculating with B-Splines
- Effects of element distortions on the performance of isoparametric elements
- A Pressure Projection Method for Nearly Incompressible Rubber Hyperelasticity, Part II: Applications
- A Pressure Projection Method for Nearly Incompressible Rubber Hyperelasticity, Part I: Theory
- Isogeometric Analysis
- A quadrilateral mixed finite element with two enhanced strain modes
- A fixed‐grid b‐spline finite element technique for fluid–structure interaction
- Stabilization of Low-order Mixed Finite Elements for the Stokes Equations
- F‐bar‐based linear triangles and tetrahedra for finite strain analysis of nearly incompressible solids. Part I: formulation and benchmarking
- On the enhancement of low-order mixed finite element methods for the large deformation analysis of diffusion in solids
- Extended B‐spline‐based implicit material point method enhanced by F‐bar projection method to suppress pressure oscillation
