An embedded model of cord-reinforced rubber composites for aircraft tires
From MaRDI portal
Publication:6544687
DOI10.1007/s00707-023-03799-6MaRDI QIDQ6544687
Jiantao Bai, Xin-Yu Xie, Ran Zhang, Wenjie Zuo
Publication date: 27 May 2024
Published in: Acta Mechanica (Search for Journal in Brave)
Classical linear elasticity (74B05) Nonlinear elasticity (74B20) Finite element methods applied to problems in solid mechanics (74S05) Composite and mixture properties (74E30)
Cites Work
- Unnamed Item
- Mixed least-squares finite element models for static and free vibration analysis of laminated composite plates
- Variational and projection methods for the volume constraint in finite deformation elasto-plasticity
- The reduced model multiscale method (R3M) for the nonlinear homogenization of hyperelastic media at finite strains
- Quasi-incompressible finite elasticity in principal stretches. Continuum basis and numerical algorithms
- Mixed isoparametric finite element models of laminated composite shells
- A new 3-D finite element model for cord-reinforced rubber composites -- application to analysis of automobile tires
- Large-strain 3D-analysis of fibre-reinforced composites using rebar elements: hyperelastic formulations for cords
- On some mixed finite element methods for incompressible and nearly incompressible finite elasticity
- Mixed Kirchhoff stress-displacement-pressure formulations for incompressible hyperelasticity
- Upper and lower bounds to the overall incremental stiffness of hyperelastic composites
- Evaluation of equivalent material properties of reinforced composites by a novel smoothed rebar element technique
- A simple way to introduce fibers into FEM models
- Introduction to Nonlinear Finite Element Analysis
- Mixed finite-element method for composite cylinder subjected to impact
- Strain-driven homogenization of inelastic microstructures and composites based on an incremental variational formulation
- A new constitutive framework for arterial wall mechanics and a comparative study of material models
- A compatible mixed finite element method for large deformation analysis of two‐dimensional compressible solids in spatial configuration
This page was built for publication: An embedded model of cord-reinforced rubber composites for aircraft tires