Lagrangian modelling of large deformation induced by progressive failure of sensitive clays with elastoviscoplasticity
From MaRDI portal
Publication:6557564
DOI10.1002/nme.5539zbMATH Open1548.74136MaRDI QIDQ6557564
Xue Zhang, Jeremy Bleyer, Scott W. Sloan, Daichao Sheng
Publication date: 18 June 2024
Published in: International Journal for Numerical Methods in Engineering (Search for Journal in Brave)
Small-strain, rate-dependent theories of plasticity (including theories of viscoplasticity) (74C10) Finite element, Rayleigh-Ritz and Galerkin methods for initial value and initial-boundary value problems involving PDEs (65M60)
Cites Work
- Unnamed Item
- Multiscale modeling and characterization of granular matter: from grain kinematics to continuum mechanics
- Simulation of the flow of fresh cement suspensions by a Lagrangian finite element approach
- Micro-macro homogenization of gradient-enhanced Cosserat media
- Second-order cone programming with warm start for elastoplastic analysis with von Mises yield criterion
- Computational Cam clay plasticity using second-order cone programming
- Numerical simulation of a flow-like landslide using the particle finite element method
- A generalized Hill's lemma and micromechanically based macroscopic constitutive model for heterogeneous granular materials
- Multi-fluid flows with the particle finite element method
- Possibilities of the particle finite element method for fluid-soil-structure interaction problems
- Formulation and solution of some plasticity problems as conic programs
- Material rate dependence and mesh-sensitivity in localization problems
- Mixed finite element methods - reduced and selective integration techniques: a unification of concepts
- On implementing a primal-dual interior-point method for conic quadratic optimization
- An \(\varepsilon\)-sensitivity analysis in the primal-dual interior point method
- Efficient numerical computations of yield stress fluid flows using second-order cone programming
- Application of a GPU-accelerated hybrid preconditioned conjugate gradient approach for large 3D problems in computational geomechanics
- A unified monolithic approach for multi-fluid flows and fluid-structure interaction using the particle finite element method with fixed mesh
- Second-order cone programming formulation for consolidation analysis of saturated porous media
- Dynamic strain localization in elasto-(visco-)plastic solids. II: Plane strain examples
- Complementarity framework for non-linear dynamic analysis of skeletal structures with softening plastic hinges
- Advances in the simulation of multi-fluid flows with the particle finite element method. Application to bubble dynamics
- A coupled FEM/DEM approach for hierarchical multiscale modelling of granular media
- Improved fractional step method for simulating fluid-structure interaction using the PFEM
- A Lagrangian finite element approach for the analysis of fluid-structure interaction problems
- Remarks on some properties of conic yield restrictions in limit analysis
- Granular column collapses: further experimental results
- Lower bound limit analysis of cohesive-frictional materials using second-order cone programming
- Melting and spread of polymers in fire with the particle finite element method
- Granular slumping on a horizontal surface
- An interior-point algorithm for elastoplasticity
- Primal-Dual Interior-Point Methods for Semidefinite Programming: Convergence Rates, Stability and Numerical Results
- Three-dimensional alpha shapes
- Viscoplasticity for instabilities due to strain softening and strain-rate softening
- A Primal-Dual Interior-Point Method for Nonlinear Programming with Strong Global and Local Convergence Properties
- Upper bound limit analysis using simplex strain elements and second-order cone programming
- The growth of slip surfaces in the progressive failure of over-consolidated clay
- Dynamic growth of slip surfaces in catastrophic landslides
- The growth of shear bands in the catastrophic failure of soils
- THE PARTICLE FINITE ELEMENT METHOD — AN OVERVIEW
- Granular collapse in two dimensions
- On a Variational Theorem in Elasticity
- A 3D upper bound limit analysis using radial point interpolation meshless method and second-order cone programming
Related Items (5)
A static discrete element method with discontinuous deformation analysis ⋮ Second-order cone programming formulation of discontinuous deformation analysis ⋮ A convex cone programming based implicit material point method ⋮ A novel implicit FEM-MPM coupling framework using convex cone programming for elastoplastic problems ⋮ Explicit-implicit schemes for calculating dynamics of elastoviscoplastic media with softening
This page was built for publication: Lagrangian modelling of large deformation induced by progressive failure of sensitive clays with elastoviscoplasticity
