Damage and plasticity at the interfaces in composite materials and structures
From MaRDI portal
Publication:658681
DOI10.1016/j.cma.2009.08.024zbMath1231.74392OpenAlexW2035142006MaRDI QIDQ658681
Publication date: 8 February 2012
Published in: Computer Methods in Applied Mechanics and Engineering (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.cma.2009.08.024
Anelastic fracture and damage (74R20) Finite element methods applied to problems in solid mechanics (74S05)
Related Items (7)
The interphase model applied to the analysis of masonry structures ⋮ A thermodynamically consistent derivation of a frictional-damage cohesive-zone model with different mode I and mode II fracture energies ⋮ A robust computational strategy for failure prediction of masonry structures using an improved multi‐surface damage‐plastic based interface model ⋮ Coupled body-interface nonlocal damage model for FRP detachment ⋮ A computational framework for low-cycle fatigue in polycrystalline materials ⋮ Energetic versus maximally-dissipative local solutions of a quasi-static rate-independent mixed-mode delamination model ⋮ A 3D two-scale multiplane cohesive-zone model for mixed-mode fracture with finite dilation
Uses Software
Cites Work
- Criteria for mesh refinement in nonlocal damage finite element analyses
- A coupled elastoplastic damage model for geomaterials
- On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects
- Strain- and stress-based continuum damage models. I. Formulation
- Strain- and stress-based continuum damage models. II. Computational aspects
- A continuum model for plastic-brittle behaviour of rock and concrete
- A new variational theory and a computational algorithm for coupled elastoplastic damage models
- A thermodynamically consistent framework for theories of elastoplasticity coupled with damage
- Constitutive and damage evolution equations of elastic-brittle materials based on irreversible thermodynamics
- A cohesive interface model for the structural mechanics of block masonry
- A thermodynamically consistent theory of gradient-regularized plasticity coupled to damage
- On the coupling of anisotropic damage and plasticity models for ductile materials.
- Nonlinear parameter identification of models for masonry.
- Anisotropic damage law in evolution
- A general framework for continuum damage models. I: Infinitesimal plastic damage models in stress space
- On the formulation of anisotropic elastic degradation. I: Theory based on a pseudo-logarithmic damage tensor rate. II: Generalized pseudo-Rankine model for tensile damage
- A new thermodynamically consistent continuum model for hardening plasticity coupled with damage
- Some fundamental issues in rate theory of damage-elastoplasticity
- Elastic-plastic-damage constitutive models with coupling internal variables
- Coupled damage and plasticity models derived from energy and dissipation potentials
- Damage-plastic model for concrete failure
- A cohesive damage-friction interface model accounting for water pressure on crack propagation
- Coupled plastic-damaged model
- Creep damage modelling for quasi-brittle materials
- Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues
- Mixed mode failure analysis of bonded joints with rate-dependent interface models
- The Thermomechanics of Plasticity and Fracture
- Damage coupled elasto-plastic finite element analysis of a Timoshenko layered beam
- Combining interface damage and friction in a cohesive‐zone model
- AN INTERFACE MODEL FOR ANALYSIS OF DEFORMATION BEHAVIOUR OF DISCONTINUITIES
- Numerical analysis of masonry structures via interface models.
- A constitutive framework based on elastic and internal energy degradation
- Constitutive theory of plasticity coupled with orthotropic damage for geomaterials.
This page was built for publication: Damage and plasticity at the interfaces in composite materials and structures
