Topology optimization with a finite strain nonlocal damage model using the continuous adjoint method
From MaRDI portal
Publication:6641864
DOI10.1016/J.CMA.2024.117333MaRDI QIDQ6641864
Kenjiro Terada, Tsuguo Kondoh, Jike Han, Kazuhiro Izui, Kozo Furuta, Shinji Nishiwaki
Publication date: 21 November 2024
Published in: Computer Methods in Applied Mechanics and Engineering (Search for Journal in Brave)
Could not fetch data.
Cites Work
- Reinforcement layout design for concrete structures based on continuum damage and truss topology optimization
- A phase field model for rate-independent crack propagation: robust algorithmic implementation based on operator splits
- Failure mitigation in optimal topology design using a coupled nonlinear continuum damage model
- Generating optimal topologies in structural design using a homogenization method
- Design of simple low order finite elements for large strain analysis of nearly incompressible solids
- Material interpolation schemes in topology optimization
- Interpolation scheme for fictitious domain techniques and topology optimization of finite strain elastic problems
- Plasticity. Mathematical theory and numerical analysis.
- Fatigue-based topology optimization with non-proportional loads
- Topology optimization for brittle fracture resistance
- A review on phase-field models of brittle fracture and a new fast hybrid formulation
- A novel elastoplastic topology optimization formulation for enhanced failure resistance via local ductile failure constraints and linear buckling analysis
- Variational crack phase-field model for ductile fracture with elastic and plastic damage variables
- Crack phase-field model equipped with plastic driving force and degrading fracture toughness for ductile fracture simulation
- Topology optimization for enhanced dynamic fracture resistance of structures
- Topology optimization of structures undergoing brittle fracture
- Stress-based bi-directional evolutionary structural topology optimization considering nonlinear continuum damage
- Topology optimization considering the fatigue constraint of variable amplitude load based on the equivalent static load approach
- A phase-field formulation for fracture in ductile materials: finite deformation balance law derivation, plastic degradation, and stress triaxiality effects
- Phase-field modeling of brittle and ductile fracture in shells with isogeometric NURBS-based solid-shell elements
- A phase-field method for computational modeling of interfacial damage interacting with crack propagation in realistic microstructures obtained by microtomography
- Topology optimization for maximizing the fracture resistance of quasi-brittle composites
- A variational phase-field model for ductile fracture with coalescence dissipation
- A unified regularized variational cohesive fracture theory with directional energy decomposition
- Thermodynamically consistent phase-field models of fracture: Variational principles and multi-field FE implementations
- F‐bar‐based linear triangles and tetrahedra for finite strain analysis of nearly incompressible solids. Part I: formulation and benchmarking
- Topology optimization of damage‐resistant structures with a predefined load‐bearing capacity
- Gurson–Tvergaard–Needleman model guided fracture‐resistant structural designs under finite deformations
- Level-set topology optimization for ductile and brittle fracture resistance using the phase-field method
- Diffusive-discrete crack transition without remeshing achieved by extended B-spline-based implicit material point method
- A novel topology optimization formulation for enhancing fracture resistance with a single quasi-brittle material
- Level-set topology optimization for maximizing fracture resistance of brittle materials using phase-field fracture model
- Topology optimization of particle-matrix composites for optimal fracture resistance taking into account interfacial damage
- Topology optimization of finite strain elastoplastic materials using continuous adjoint method: formulation, implementation, and applications
- A diffusive-discrete crack transition scheme for ductile fracture at finite strain
This page was built for publication: Topology optimization with a finite strain nonlocal damage model using the continuous adjoint method
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q6641864)
