Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification
From MaRDI portal
Publication:849980
DOI10.1016/j.ijplas.2006.03.010zbMath1230.74051OpenAlexW2092595888MaRDI QIDQ849980
Publication date: 15 November 2006
Published in: International Journal of Plasticity (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.ijplas.2006.03.010
Anisotropy in solid mechanics (74E10) Crystalline structure (74E15) Large-strain, rate-independent theories of plasticity (including nonlinear plasticity) (74C15)
Related Items (19)
An evaluation of a combined isotropic-kinematic hardening model for representation of complex strain-path changes in dual-phase steel ⋮ Comparison of two models for anisotropic hardening and yield surface evolution in bcc sheet steels ⋮ Analysis of sheet metal formability through isotropic and kinematic hardening models ⋮ A `stack' model of rate-independent polycrystals ⋮ On the modeling of hardening in metals during non-proportional loading ⋮ Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6 V at room temperature ⋮ A binary-tree based model for rate-independent polycrystals ⋮ A novel approach for anisotropic hardening modeling. II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material ⋮ Sheet metal forming and springback simulation by means of a new reduced integration solid-shell finite element technology ⋮ A crystal plasticity model for strain-path changes in metals ⋮ Variational constitutive updates for microstructure evolution in hcp metals ⋮ Elastic-plastic behaviour of dual-phase, high-strength steel under strain-path changes ⋮ Forming limit stresses predicted by phenomenological plasticity theories with anisotropic work-hardening behavior ⋮ An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals ⋮ Application of strain rate potentials with multiple linear transformations to the description of polycrystal plasticity ⋮ Experimental characterization and model identification of directional hardening effects in metals for complex strain path changes ⋮ A combined phenomenological model for the representation of anisotropic hardening behavior in high strength steel line pipes ⋮ Comparison of the work-hardening of metallic sheets using tensile and shear strain paths ⋮ Time integration scheme for elastoplastic models based on anisotropic strain-rate potentials
This page was built for publication: Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification
