Path-dependence of the forming limit stresses in a sheet metal
From MaRDI portal
Publication:873595
DOI10.1016/j.ijplas.2006.05.005zbMath1349.74289OpenAlexW2045216684MaRDI QIDQ873595
Kengo Yoshida, Toshihiko Kuwabara, Mitsutoshi Kuroda
Publication date: 29 March 2007
Published in: International Journal of Plasticity (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.ijplas.2006.05.005
Small-strain, rate-dependent theories of plasticity (including theories of viscoplasticity) (74C10) Crystals in solids (74N05)
Related Items (10)
A new approach for failure criterion for sheet metals ⋮ Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. III: Yield surface in tension-tension stress space (Al 6061-T 6511 and annealed 1100 Al) ⋮ Forming limit stresses predicted by phenomenological plasticity theories with anisotropic work-hardening behavior ⋮ Anisotropic hardening and non-associated flow in proportional loading of sheet metals ⋮ Prediction of forming limit curve at fracture for sheet metal using new ductile fracture criterion ⋮ Forming simulation of aluminum sheets using an anisotropic yield function coupled with crystal plasticity theory ⋮ Study of a drawing-quality sheet steel. I: Stress/strain behaviors and Lankford coefficients by experiments and micromechanical simulations ⋮ Study of a drawing-quality sheet steel. II: Forming-limit curves by experiments and micromechanical simulations ⋮ Ellipticity loss analysis for tangent moduli deduced from a large strain elastic-plastic self-consistent model ⋮ Generalised forming limit diagrams showing increased forming limits with non-planar stress states
This page was built for publication: Path-dependence of the forming limit stresses in a sheet metal
