Identification of higher-order elastic constants for grain assemblies based upon granular micromechanics
From MaRDI portal
Publication:890774
DOI10.2140/memocs.2015.3.285zbMath1329.74225OpenAlexW2153272304MaRDI QIDQ890774
Payam Poorsolhjouy, Anil Misra
Publication date: 11 November 2015
Published in: Mathematics and Mechanics of Complex Systems (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.2140/memocs.2015.3.285
Micromechanics of solids (74M25) Effective constitutive equations in solid mechanics (74Q15) Granularity (74E20)
Related Items (31)
Extensional \textit{Elastica} in large deformation as \(\Gamma \)-limit of a discrete 1D mechanical system ⋮ A new deformation measure for the nonlinear micropolar continuum ⋮ Statistical prediction of bone microstructure degradation to study patient dependency in osteoporosis ⋮ A review of presentations and discussions of the workshop Computational mechanics of generalized continua and applications to materials with microstructure that was held in Catania 29–31 October 2015 ⋮ Equilibrium paths of Hencky pantographic beams in a three-point bending problem ⋮ Anisotropic strain gradient thermoelasticity for cellular structures: plate models, homogenization and isogeometric analysis ⋮ Exegesis of Sect. II and III.A from “Fundamentals of the Mechanics of Continua” by E. Hellinger ⋮ Elastoplastic analysis of pressure‐sensitive materials by an effective three‐dimensional mixed finite element ⋮ Exegesis of the Introduction and Sect. I from “Fundamentals of the Mechanics of Continua”** by E. Hellinger ⋮ Nonlinear dynamics of uniformly loaded Elastica: Experimental and numerical evidence of motion around curled stable equilibrium configurations ⋮ Granular micromechanics‐based identification of isotropic strain gradient parameters for elastic geometrically nonlinear deformations ⋮ On the wave dispersion in microstructured solids ⋮ Bias extension test for pantographic sheets: numerical simulations based on second gradient shear energies ⋮ Second gradient homogenization of multilayered composites based on the method of oscillating functions ⋮ Large Oscillations Around Curled Equilibrium Configurations of Uniformly Loaded Euler–Bernoulli Beams: Numerical and Experimental Evidences ⋮ Extended granular micromechanics approach: a micromorphic theory of degreen ⋮ Influence of bone microstructure distribution on developed mechanical energy for bone remodeling using a statistical reconstruction method ⋮ Material characterization and computations of a polymeric metamaterial with a pantographic substructure ⋮ Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models ⋮ A model for bone mechanics and remodeling including cell populations dynamics ⋮ Two-dimensional strain gradient damage modeling: a variational approach ⋮ Granular micromechanics model of anisotropic elasticity derived from Gibbs potential ⋮ Euromech 579, Arpino 3--8 April 2017: ``Generalized and microstructured continua: new ideas in modeling and/or applications to structures with (nearly)inextensible fibers -- a review of presentations and discussions ⋮ Granular micromechanics based continuum model for grain rotations and grain rotation waves ⋮ Three-point bending test of pantographic blocks: numerical and experimental investigation ⋮ The Effect of Mechanical Load-induced Intraosseous Pressure Gradients on Bone Remodeling ⋮ Estimating Fatigue Related Damage in Alloys under Block-type Non-symmetrical Low-cycle Loading ⋮ Dynamical Vector Fields on Pantographic Sheet: Experimental Observations ⋮ An application of Coulomb-friction model to predict internal dissipation in concrete ⋮ Longitudinal and transverse elastic waves in 1D granular materials modeled as micromorphic continua ⋮ On the statics and dynamics of granular-microstructured rods with higher order effects
This page was built for publication: Identification of higher-order elastic constants for grain assemblies based upon granular micromechanics
