Failure modes and effective strength of two-phase materials determined by means of numerical limit analysis
From MaRDI portal
Publication:925902
DOI10.1007/s00707-007-0550-9zbMath1136.74037OpenAlexW2054707693MaRDI QIDQ925902
J. Füssl, Herbert A. Mang, Roman Lackner, Josef Eberhardsteiner
Publication date: 26 May 2008
Published in: Acta Mechanica (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1007/s00707-007-0550-9
Anelastic fracture and damage (74R20) Effective constitutive equations in solid mechanics (74Q15) Composite and mixture properties (74E30)
Related Items (9)
Limit analysis of FGM circular plates subjected to arbitrary rotational symmetric loads using von-Mises yield criterion ⋮ Smoothed finite element approach for kinematic limit analysis of cohesive frictional materials ⋮ Strength design of porous materials using B-Spline based level set method ⋮ Contribution of the fill to the static behaviour of arched masonry structures: theoretical formulation ⋮ Theorems for masonry solids with brittle time-decaying tensile limit strength ⋮ Numerical modeling of the in-plane behavior of historical brick masonry walls ⋮ An algorithm for adaptive introduction and arrangement of velocity discontinuities within 3D finite-element-based upper bound limit analysis approaches ⋮ An edge-based finite element method (ES-FEM) with adaptive scaled-bubble functions for plane strain limit analysis ⋮ Efficient kinematic upper-bound limit analysis for hole/inclusion problems by adaptive XIGA with locally refined NURBS
Uses Software
Cites Work
- Computational formulation of shakedown analysis as a conic quadratic optimization problem
- HOPDM (version 2. 12) -- a fast LP solver based on a primal-dual interior point method
- On implementing a primal-dual interior-point method for conic quadratic optimization
- An iterative algorithm for limit analysis with nonlinear yield functions
- The effect of interfacial properties on the cohesion of highly filled composite materials
- A smooth hyperbolic approximation to the Mohr-Coulomb yield criterion
- A new discontinuous upper bound limit analysis formulation
- Lower bound limit analysis of cohesive-frictional materials using second-order cone programming
- Upper bound limit analysis using linear finite elements and non-linear programming
- A micromechanical approach to the strength criterion of Drucker‐Prager materials reinforced by rigid inclusions
- Lower bound limit analysis using non-linear programming
- A general non-linear optimization algorithm for lower bound limit analysis
- Upper bound limit analysis using discontinuous quadratic displacement fields
This page was built for publication: Failure modes and effective strength of two-phase materials determined by means of numerical limit analysis
