Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process
From MaRDI portal
Publication:944446
DOI10.1007/s11831-008-9018-xzbMath1144.74042OpenAlexW1977436908WikidataQ58870424 ScholiaQ58870424MaRDI QIDQ944446
Publication date: 17 September 2008
Published in: Archives of Computational Methods in Engineering (Search for Journal in Brave)
Full work available at URL: http://hdl.handle.net/10316/7651
Friction in solid mechanics (74M10) Contact in solid mechanics (74M15) Finite element methods applied to problems in solid mechanics (74S05) Research exposition (monographs, survey articles) pertaining to mechanics of deformable solids (74-02)
Related Items (12)
Three-dimensional computational analysis of stress state transition in through-cracked plates ⋮ Micromechanical study of the dilatational response of porous solids with pressure-insensitive matrix displaying tension-compression asymmetry ⋮ A hybrid finite element formulation for large-deformation contact mechanics ⋮ A contact smoothing method for arbitrary surface meshes using Nagata patches ⋮ An augmented Lagrangian technique combined with a mortar algorithm for modelling mechanical contact problems ⋮ Automatic solver for non-linear partial differential equations with implicit local laws: Application to unilateral contact ⋮ Analytical sensitivity matrix for the inverse identification of hardening parameters of metal sheets ⋮ Comparison between Berkovich, Vickers and conical indentation tests: a three-dimensional numerical simulation study ⋮ Applying Nagata patches to smooth discretized surfaces used in 3D frictional contact problems ⋮ Large deformation analysis of elastoplastic homogeneous materials via high order tetrahedral finite elements ⋮ Complementarity problems in structural engineering: an overview ⋮ Surface smoothing procedures in computational contact mechanics
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Consistent tangent operators for rate-independent elastoplasticity
- A perturbed Lagrangian formulation for the finite element solution of contact problems
- Study on the influence of work-hardening modeling in springback prediction
- FE analysis of sheet metal forming processes using continuous contact treatment
- Sliding interfaces with contact-impact in large-scale Lagrangian computations
- A mathematical programming approach to three-dimensional contact problems with friction
- A mixed formulation for frictional contact problems prone to Newton like solution methods
- Finite-element formulations for problems of large elastic-plastic deformation
- On the elastic solution of frictional contact problems using variational inequalities
- On the constitutive modeling and finite element computation of rate-dependent frictional sliding in large deformations
- Shape error evaluation method of free-form surfaces.
- A mortar segment-to-segment contact method for large deformation solid mechanics.
- Meshless shape design sensitivity analysis and optimization for contact problem with friction
- Application of ALE finite element method to a lubricated friction model in sheet metal forming
- Adding bending stiffness to 3-D membrane FEM programs
- The mortar finite element method for contact problems.
- Simulation of springback
- Role of plastic anisotropy and its evolution on springback
- Accurate modeling of contact using cubic splines
- On adaptive strategies for large deformations of elasto-plastic solids at finite strains: Computational issues and industrial applications
- Quadratic programming method in numerical simulation of metal forming process.
- 3D-IHCP on a finite cube
- Large deformation frictional contact mechanics: Continuum formulation and augmented Lagrangian treatment
- On the numerical modeling of frictional wear phenomena
- A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming.
- On a physically stabilized one point finite element formulation for three-dimensional finite elasto-plasticity
- Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by the finite element method
- Extension of the node-to-segment contact element for surface-expansion-dependent contact laws
- On the modelling of smooth contact surfaces using cubic splines
- Complementarity methods for multibody friction contact problems in finite deformations
- A novel three‐dimensional contact finite element based on smooth pressure interpolations
- A geometrical‐based contact algorithm using a barrier method
- Smooth C1‐interpolations for two‐dimensional frictional contact problems
- FFS contact searching algorithm for dynamic finite element analysis
- Automatic contact searching algorithm for dynamic finite element analysis
- A new symmetric contact element stiffness matrix for frictional contact problems
- A practical large-strain solid finite element for sheet forming
- A three-dimensional impact-penetration algorithm with erosion
- A note on the optimum choice for penalty parameters
- Generalization of selective integration procedures to anisotropic and nonlinear media
- Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis
- An augmented lagrangian treatment of contact problems involving friction
- Contact‐impact by the pinball algorithm with penalty and Lagrangian methods
- Formulation and comparison of algorithms for frictional contact problems
- A method for solving contact problems
- Fundamental considerations for the finite element analysis of shell structures
- On the constraint function method for contact problems
- AUGMENTED LAGRANGIAN FINITE-ELEMENTS FOR PLATE CONTACT PROBLEMS
- A contact algorithm for problems involving quadrilateral approximation of surfaces
- Rigid-plastic/rigid-viscoplastic FE simulation using linear programming for metal forming
- Cn continuous modelling of smooth contact surfaces using NURBS and application to 2D problems
- Analysis of 3D problems using a new enhanced strain hexahedral element
- Improvement of a frictional contact algorithm for strongly curved contact problems
- Numerical derivation of contact mechanics interface laws using a finite element approach for large 3D deformation
- An augmented Lagrangian method for discrete large‐slip contact problems
- A superlinear convergent augmented Lagrangian procedure for contact problems
- A finite element model for thermomechanical analysis of sheet metal forming
- A 3D contact smoothing method using Gregory patches
- A monolithic smoothing-gap algorithm for contact-impact based on the signed distance function
- Automation and Assessment of Augmented Lagrangian Algorithms for Frictional Contact Problems
- An augmented Lagrangian quasi‐Newton solver for constrained nonlinear finite element applications
- On augmented Lagrangian algorithms for thermomechanical contact problems with friction
- Algorithms for the analysis of 3D finite strain contact problems
- Finite element simulations of sheet-metal forming processes for planar-anisotropic materials
This page was built for publication: Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process
