Three-dimensional numerical investigation of a droplet impinging normally onto a wall film
From MaRDI portal
Publication:996506
DOI10.1016/j.jcp.2006.12.002zbMath1119.76013OpenAlexW2142921991MaRDI QIDQ996506
Nikolaos Nikolopoulos, Andreas Theodorakakos, George Bergeles
Publication date: 14 September 2007
Published in: Journal of Computational Physics (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.jcp.2006.12.002
Navier-Stokes equations for incompressible viscous fluids (76D05) Finite volume methods applied to problems in fluid mechanics (76M12) Capillarity (surface tension) for incompressible viscous fluids (76D45)
Related Items
An accurate adaptive solver for surface-tension-driven interfacial flows ⋮ Coupling a local adaptive grid refinement technique with an interface sharpening scheme for the simulation of two-phase flow and free-surface flows using VOF methodology ⋮ Off-centre binary collision of droplets: a numerical investigation ⋮ A numerical study on splash of oblique drop impact on wet walls ⋮ Limitation of the contact angle in the problem of a drop of a liquid on a vibrating substrate ⋮ The effect of gas and liquid properties and droplet size ratio on the central collision between two unequal-size droplets in the reflexive regime ⋮ Oblique impact of droplet on a moving film in spray cooling ⋮ Numerical simulation of droplet impacting liquid surface by SPH ⋮ Numerical investigation on the evaporation of droplets depositing on heated surfaces at low Weber numbers ⋮ A numerical investigation of central binary collision of droplets ⋮ A robust incompressible Navier-Stokes solver for high density ratio multiphase flows ⋮ Automatic tracking of corona propagation in three-dimensional simulations of non-normal drop impact on a liquid film ⋮ Grid convergence assessment for adaptive grid simulations of normal drop impacts onto liquid films in axi-symmetric and three-dimensional geometries ⋮ A direct comparison between volume and surface tracking methods with a boundary-fitted coordinate transformation and third-order upwinding ⋮ Numerical investigation of the cooling effectiveness of a droplet impinging on a heated surface ⋮ 3D numerical simulation of flow and conjugate heat transfer through a pore scale model of high porosity open cell metal foam ⋮ Assessment of dynamic adaptive grids in volume-of-fluid simulations of oblique drop impacts onto liquid films ⋮ Height functions for applying contact angles to 3D VOF simulations ⋮ Droplet impact on a moving thin film with pseudopotential lattice Boltzmann method
Cites Work
- Volume of fluid (VOF) method for the dynamics of free boundaries
- Multi-dimensional modeling of thin liquid films and spray-wall interactions resulting from impinging sprays
- A method for capturing sharp fluid interfaces on arbitrary meshes
- Free liquid jets and films: Hydrodynamics and rheology
- Approximate critical Weber number for the breakup of an expanding torus
- A calculation procedure for heat, mass and momentum transfer in three- dimensional parabolic flows
- Simulation of sharp gas–liquid interface using VOF method and adaptive grid local refinement around the interface
- The dynamics of thin-sheets of fluid. I. Water bells
- Numerical study of the turbulent flow past an airfoil with trailing edge separation
- An investigation of the flow regimes resulting from splashing drops
- Splashing impact of a single drop onto very thin liquid films
- Modeling crown formation due to the splashing of a droplet
- Droplet splashing on a thin liquid film
- Single drop impact onto liquid films: neck distortion, jetting, tiny bubble entrainment, and crown formation
- The ejecta sheet generated by the impact of a drop
- Impact of a drop onto a wetted wall: description of crown formation and propagation
