Pages that link to "Item:Q849980"
From MaRDI portal
The following pages link to Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification (Q849980):
Displaying 25 items.
- Analysis of sheet metal formability through isotropic and kinematic hardening models (Q388305) (← links)
- A `stack' model of rate-independent polycrystals (Q414334) (← links)
- A binary-tree based model for rate-independent polycrystals (Q422519) (← links)
- A novel approach for anisotropic hardening modeling. II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material (Q422645) (← links)
- Application of strain rate potentials with multiple linear transformations to the description of polycrystal plasticity (Q546693) (← links)
- Sheet metal forming and springback simulation by means of a new reduced integration solid-shell finite element technology (Q646242) (← links)
- An evaluation of a combined isotropic-kinematic hardening model for representation of complex strain-path changes in dual-phase steel (Q837925) (← links)
- A crystal plasticity model for strain-path changes in metals (Q929005) (← links)
- Elastic-plastic behaviour of dual-phase, high-strength steel under strain-path changes (Q950433) (← links)
- An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals (Q959918) (← links)
- Experimental characterization and model identification of directional hardening effects in metals for complex strain path changes (Q991710) (← links)
- Comparison of the work-hardening of metallic sheets using tensile and shear strain paths (Q1013921) (← links)
- Interpretation of the behavior of metals under large plastic shear deformations: A macroscopic approach (Q1369701) (← links)
- Failure prediction in anisotropic sheet metals under forming operations with consideration of rotating principal stretch directions (Q1566971) (← links)
- Numerical study of the flange earing of deep-drawing sheets with stronger anisotropy (Q1590474) (← links)
- Comparison of two models for anisotropic hardening and yield surface evolution in bcc sheet steels (Q1657744) (← links)
- A combined phenomenological model for the representation of anisotropic hardening behavior in high strength steel line pipes (Q2034367) (← links)
- On the modeling of hardening in metals during non-proportional loading (Q2427703) (← links)
- Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6 V at room temperature (Q2428386) (← links)
- Forming limit stresses predicted by phenomenological plasticity theories with anisotropic work-hardening behavior (Q2476938) (← links)
- Time integration scheme for elastoplastic models based on anisotropic strain-rate potentials (Q3649889) (← links)
- (Q4201411) (← links)
- Variational constitutive updates for microstructure evolution in hcp metals (Q4900435) (← links)
- (Q5014859) (← links)
- Elastoplasticité anisotrope non normale en grandes deformations avec endommagement (Q5494440) (← links)
