The following pages link to Mechanism and Machine Theory (Q129633):
Displaying 50 items.
- Singular planes of serial wrist-partitioned manipulators and their singularity metrics (Q886355) (← links)
- Kinematic mobility analysis of peptide based nano-linkages (Q886358) (← links)
- Nonlinear vibrations and buckling of a flexible rotating beam: a prescribed torque approach (Q886360) (← links)
- Design, simulation of meshing, and contact stresses for an improved worm gear drive (Q886361) (← links)
- Kinematic calibration of a wire-actuated parallel robot (Q886363) (← links)
- Study on an internal gear with asymmetric involute teeth (Q886364) (← links)
- Cable shovel digging optimization for energy efficiency (Q886367) (← links)
- 3-PRRR redundant planar parallel manipulator: inverse displacement, workspace and singularity analyses (Q886370) (← links)
- Research on constant-diameter CAM mechanism with a planar motion follower (Q886372) (← links)
- Synthesis of a cam system for the measurement and follow rest of multi-step shaft necks at machining (Q886374) (← links)
- Numerical and experimental study of a rotor-bearing-seal system (Q886376) (← links)
- Optimized tooth profile based on identified gear dynamic model (Q886378) (← links)
- In memoriam: Konstantin Vasilyevich Frolov (1932--2007) (Q925792) (← links)
- Capstan equation including bending rigidity and non-linear frictional behavior (Q925794) (← links)
- A procedure to count the number of planar mechanisms subject to design constraints from kinematic chains (Q925795) (← links)
- Improved rotor profiling based on the arbitrary sealing line for twin-screw compressors (Q925797) (← links)
- Application of frequency family separation method based upon EMD and local Hilbert energy spectrum method to gear fault diagnosis (Q925799) (← links)
- Kinematic design of large displacement precision \(XY\) positioning stage by using cross strip flexure joints and over-constrained mechanism (Q925802) (← links)
- Transitions in the velocity pattern of lower mobility parallel manipulators (Q925805) (← links)
- Topology of serial and parallel manipulators and topological diagrams (Q925807) (← links)
- Mesh analysis and torque fluctuation for electromechanical integrated toroidal drive (Q925808) (← links)
- Research on basic principle of moulding-surface conjugation (Q928920) (← links)
- Study on the tooth profile for the screw claw-type pump (Q928922) (← links)
- Optimization of asymmetric spur gear drives to improve the bending load capacity (Q928925) (← links)
- Tensegrity frameworks: static analysis review (Q928928) (← links)
- A novel family of linkages for advanced motion synthesis (Q928929) (← links)
- Optimal balancing of flexible rotors by minimizing the condition number of influence coefficients (Q928934) (← links)
- On the kinematics and kinetics of mechanical seals, rotors, and wobbling bodies (Q928935) (← links)
- Inverse dynamics of a planetary gear train for robotics (Q928936) (← links)
- Contact problem and numeric method of a planetary drive with small teeth number difference (Q933338) (← links)
- Kinematics analysis of the CUR translational manipulator (Q933340) (← links)
- Kinematics/statics analysis of a novel 2S\(\underline {\text{P}}\)S + \(\underline {\text{PR}}\)R\(\underline {\text{P}}\)R parallel manipulator (Q933342) (← links)
- Unification and simplification of velocity/acceleration of limited-dof parallel manipulators with linear active legs (Q933343) (← links)
- Increase of singularity-free zones in the workspace of parallel manipulators using mechanisms of variable structure (Q933345) (← links)
- Accuracy analysis of a multi-loop linkage with joint clearances (Q933347) (← links)
- The study on the design of spiral bevel gear sets with circular-arc contact paths and tooth profiles (Q933350) (← links)
- A simple method to calculate mobility with Jacobian (Q933354) (← links)
- Conceptual design and dimensional synthesis of ``MicroHand'' (Q933358) (← links)
- Influence of reinforcement on composite gear metrology (Q933361) (← links)
- From the trailed disc plough to spatial involute gearing and beyond. A celebration of an 85th birthday [of Jack Raymond Phillips] (Q933685) (← links)
- Experimental investigation and FEM analysis of resonance frequency behavior of three-dimensional, thin-walled spur gears with a power-circulating test rig (Q933686) (← links)
- Kinematic analysis of linkages based on finite elements and the geometric stiffness matrix (Q933689) (← links)
- A type synthesis method for hybrid robot structures (Q933693) (← links)
- Numerical and experimental analysis of non-circular gears and CAM-follower systems as function generators (Q933696) (← links)
- On the correction capability of a deployed tape-spring hexapod (Q933697) (← links)
- Some problems on the 2DOF theory of gearing (Q933698) (← links)
- High-order model and slide mode control for rotating flexible smart structure (Q933700) (← links)
- A short account on Leonardo Torres' endless spindle (Q933701) (← links)
- Stick/slip phenomena in dynamics: choice of contact model. Numerical predictions \& experiments (Q945473) (← links)
- A methodology for implementing the curvature theory approach to path tracking with planar robots (Q945476) (← links)
